Soccer field artificial turf maintenance program

What are the common problems in the use of artificial turf balls in football stadiums? Daily we often encounter problems when using artificial turf balls on football fields. These problems are inevitable. Let's give a brief example for everyone today. Our common problems that occur when using artificial turf balls on football fields:

First, artificial turf grass fiber fade, discoloration?

1. The quality of grass fiber is unqualified, for example, the amount of anti-ultraviolet (UV) agent and anti-aging (amine) agent is too small;

2. The formulation of grass fiber is not scientific, and some additives with poor quality are more;

3. The production equipment of artificial turf fiber is backward, the technology is poor, and the physical performance is unstable;

4. Environmental influences, such as strong ultraviolet radiation in some areas, acid rain, industrial pollution, etc.

Second, grass fiber fluffing, pilling and powdering?

1. Because of the high frequency of school use, the poor quality of the reticular fibres in 1-2 years, the better quality of 4-5 years will have different degrees of grass fiber split into 50-60 filaments;

2, PP fiber itself is relatively hard, brittle, easy to fluff, pilling.

Third, grass fiber shedding, hair loss?

1. Poor production process, poor quality of artificial turf bottom cloth and glue, resulting in poor binding force to grass as a whole;

2, grass fiber using low-end grass (such as PP material), use the middle line to disconnect from the grass;

3, the use of accessories failed (quartz sand particles are too large, not round), causing damage to the grass.

Fourth, the artificial turf bottom corrosion, cracking?

1. The bottom of the artificial turf is thin, and the general PP material is used;

2. The glue quality used at the bottom is poor or the gluing process is poor, too thick;

3. The foundation of the site is unqualified, and the damage to the bottom of artificial turf is large.

4, the overall poor drainage, the base fabric soaked in water for a long time.

Fifth, the site artificial turf color uneven, serious color difference?

1, artificial turf fiber quality is poor, uneven thickness, color instability, easy to cause different color;

2. Poor installation design of the site, filling of the site with uneven materials, resulting in visual color difference;

3. The foundation of the site is uneven and the joints have obvious marks;

4. Filled accessories are unqualified and the surface is contaminated;

Six, artificial turf venue interface is uneven, gap is too large?

1. The groundwork of the site did not meet the requirements of the standard and was not even, resulting in an uneven interface;

2. Improper connection of joints of artificial turf causes unevenness;

3, artificial turf production process and quality problems caused by deformation, can not be straightened, resulting in gaps;

4, lack of professional construction experience, the lack of dedicated construction tools and qualified skilled technicians.

7. The venue is black and the surface is messy.

1. Excessive or inferior colloidal particles used in the site cause large areas of black pollution;

2. The artificial turf has fallen off in more than one area, leaving only fillers;

3, lack of professional construction experience, lack of dedicated tools and qualified skilled technicians;

4, lack of necessary maintenance after the completion of the construction;

Eight, ground floor consolidation?

1, the foundation is not smooth, easy to collect water, soaked for a long time;

2. The used quartz sand and other accessories are too fine or uneven;

3. The used rubber particles, quartz sand and other auxiliary materials have too much impurities or large mud content;

4. The quality of artificial turf is poor, there is no elasticity and it is easy to lose hair, and lack of necessary maintenance;

9. The ground floor is uneven and the artificial turf is sparsely uneven.

1. The foundation of the artificial turf ground is uneven

2. Uneven filling of auxiliary materials; part of the grass seedlings are covered by filling materials during the construction process;

3, artificial turf production process is not professional, there is a greater error in grass height;

4, lack of professional construction experience, the lack of dedicated construction tools and qualified skilled technicians.

Ten, site water?

1. The basic level is uneven and low places are easy to accumulate water;

2, lack of maintenance caused floor knots, poor drainage;

3, local grass fiber wear bad, open into potholes;

4, filling material is not reasonable.