Kindergarten artificial turf introduction and paving instructions

Kindergarten artificial turf is now mainly used face-free red sand grass, which is mixed with grass, encrypted grass, the height of the general choice of 10 mm, 20 mm, 25 mm, etc., the density is generally between 13750 to 63000.

The bottom fabric is made of composite backing, mesh backing, BASF glue, no odor, anti-aging, kindergarten indoor and outdoor can be installed and used, with 9001, CE international certification, export quality!

The grass fiber material adopts high-quality straw fibers made in China, joint ventures, and imports. It does not add any recyclables. Each grass blade is supplemented with anti-ultraviolet agents and anti-aging agents. It has a laboratory 150,000-turn abrasion test certification.

Really dedicated kindergarten artificial turf. The weaving process uses a straight mixed structure, that is, straight plus grass (pe + pp), and instead of quartz sand with koji grass, the thickness and elasticity of the lawn are increased.

The production process uses Italian four-meter wide machine production, can produce four meters wide, the length can be adjusted, and can be customized according to the actual situation of the customer size and color, red green white blue red

Purple can be customized processing. The new imported drying tunnel guarantees the smoothness of the lawn, even glue leakage without glue, the entire production process pipeline operations, uniform color and no color phenomenon, we

All produce 3,800 square meters, with monthly output of more than 300,000 square meters. There is a large amount of inventory in the room and about 36,000 square meters of conventional products are available.

Kindergarten artificial turf installation instructions:

First, clean up the areas that need to be covered with artificial turf, no dust, and if possible, rinse with water.

Second, after the lawn is transported to the playground of the kindergarten, it is advisable to dry all the lawns for drying for 2-3 hours according to the guide, so that the lawn can naturally expand and contract and reach an ideal state.

3. Adhere the joint strips to the crevices of the lawn and place the gaps on all the lawns in contact with the sealing strips.

Fourth, the back of the lawn and the front of the seam belt, uniform brushing artificial turf adhesive, such as sticky hands and then bonding, bonding rubber hammer is best to use pressure.

During the construction process, the two black sides of the lawn should be cut off. Pay attention to the fall of the lawn. The difference in the backward direction will lead to visual color difference.

maintenance:

Vehicles are prohibited from entering and rolling back and forth

It is forbidden to smoke on the lawn, spitting and throwing the rind.

It is prohibited to throw chewing gum above the lawn.

If there is any gel opening during use, please repair it and use it again.

In winter, you need to sweep away the snow and use it again.